Anvils are functional blocks used as the work surface when smithing metal items.
The first step in this process is to create an anvil mold via the clay forming mechanic. The anvil is then cast using the casting mechanic. An anvil requires 900 units (9 ingots) of copper or bronze alloy to fill the mold. Once an anvil is cast and removed from the mold, it may be placed like any other block onto a solid surface. No tools are required to break an anvil to pick it up and re-position it.
Iron and Meteoric Iron Anvil
Anvils made out of iron or meteoric iron can not be cast like anvils out of other metals. The player first has to make the upper and lower part of the anvil separately, smithing them on a bronze anvil. Then, the two parts need to be welded together.
To make a complete iron anvil, a total of 10 iron ingots are needed, 5 each for the anvil base and anvil top, as well as one powdered borax. One ingot amounts to 42 pixels added, and the anvil base and top need 196 and 210 pixels respectively.
The recipe has an upper height limit of pixels, which means adding too many ingots too fast without first distributing previously placed pixels might effectively delete pixels altogether! Make sure to add the next ingot only after distributing the pixels from the last one.
Start the crafting process by placing a heated iron ingot on the anvil - bronze or higher anvil tier is needed. Select the anvil base and start hammering. Note that for the base, a total of 5 ingots need to be added, and there is at maximum 14 pixels worth room for error. This process might be easier when starting with one iron plate as the base, and then adding 3 more ingots, one at a time.
To lessen the chance of wasting pixels - and thus ingots - it is necessary to add one ingot, flatten it out and only then add the next - and so forth. The space on which the next anvil will be added is always the same, and the player can make sure that this space is flat and below the maximum height limit of the recipe, which is 6 pixels, or 3 ingots stacked. Keep in mind that a new ingot added will only fill in the empty pixels in that specific space, so it is recommended to keep the ingot place as flat as possible. The ingot will however rise with the rest, meaning it will be added on top of the current surface.
An optimum way of smithing can be seen below, with the focus on keeping the "ingot landing space" as empty and flat as possible. However, keep in mind that this is the best way to save iron ingots, not the best way to save coal.
Elevating the anvil on which the player crafts the new anvil parts might help checking for missing or misplaced pixels. Try putting the anvil on eye level, or digging a trench around it - this allows you to check the work item from the side. Pressing G to sit down has a similar effect.
The anvil base needs a total of 196 pixels, divided into five layers:
- 80 first layer
- 38 each for second and third layer
- 20 each for fourth and fifth layer
For the anvil top, follow the same process. However, keep in mind that for the top part, even with careful smithing, not even one pixel will be wasted. This means there is no margin for error, and any wasted pixels will result in a sixth ingot added to finish the item. As the top part is rather slim, a plate is not helpful as the smithing base.
The anvil top needs a total of 210 pixels, divided into five layers:
- 78 first layer
- 48 second layer
- 40 third layer
- 24 fourth layer
- 20 fifth layer
After both the base and top are finished, heat both of them up in a forge. Once heated, first place the base part down on the ground. Take one portion of powdered borax and apply with a Shift click on the placed base, then add the top part. Hammer until both parts are welded together, this should take about 12 hits.
The anvil is the work surface used for smithing metal tools from ingots heated in a forge. When a heated ingot is placed on the anvil, a dialog box opens to allow the player to select the item to be crafted. Copper and Bronze items can be worked on any anvil, but iron items can only be worked on a bronze or iron anvil and steel items can only be worked on an iron anvil.
An anvil cannot be smelted to recover the material used in creating the item, however since version 1.14, the player can use a chisel and anvil of the same metal type in the crafting grid to recover 8 ingots worth of metal. Keep in mind that both the anvil and the chisel will be destroyed in the process, meaning from the original 10 ingots, two will be permanently lost.
Since version 1.14, falling anvils do considerable damage when hitting a player or other entity.
|Detailed guide through the iron anvil smithing process|
|Main Page: Vanilla Game Content|
|Terrain Blocks||Clay Gravel Peat Rock Sand Soil|
|Construction Blocks||Ceramic Blocks Glass Planks Plaster Soil Blocks Stone Blocks Path|
|Functional Blocks||BarrelWooden Bucket Bed Containers Firepit Forge Loot Vessels Ore blasting bomb Trough|
|Decorative Blocks||Paintings Carpets Bookshelves Flowerpots Wallpapers Tapestry|
|Metal Working||Anvil Bloomery Crucible Forge Helve hammer Molds Metal Gemstone|
|Tools & Weapons||Axe Bow Chisel Cleaver Club Hammer Hoe Knife Pickaxe Prospecting Pick Saw Scythe Shears Shovel Spear Sword|
|Equipment||Armor Clothes Containers|
|Craftable Resources||Boards Charcoal Coke Firewood Ingots Leather Flax|
|Plants||Berry Bushes Cooper's Reed (Cattail) Flowers Grass Other Plants Trees Wild Foods|
|Mobs||Bees Bighorn sheep Chicken Drifter Fox Hare Hyena Locust Raccoon Wild Pig Wolf|
|Mechanics||Animal Husbandry Beekeeping Casting Clay Forming Combat Farming Cooking Satiety Knapping Mechanical Power Mining Smithing Trading Temporal Stability Steel Making|
|Crafting Recipes Fuel Leather Working Light sources Ore Deposits Ruins Starter Guide World Generation|