Steel making/fr

Cette page a été vérifiée pour la dernière fois pour Vintage Story avec la version 1.17.10.

La fabrication de l'acier est le processus de carbonisation (ou cémentation) du fer à haute température, pour lequel un nouveau type de fourneau est nécessaire.

Installations requises

Pour produire de l'acier , le joueur a besoin d'une enclume en fer, d'une forge , et d'un four de cémentation réfractaire, qui à son tour demande la mise en production d'un broyeur .

Matériaux nécessaires

Pour la construction d'un four de cémentation fonctionnel, le joueur doit réunir :

• 1 porte en fer
• 2 éléments de cercueil en pierre
• 2 éléments de couvercle de cercueil en pierre
• 6 grilles en briques réfractaires
• 53 blocs de briques réfractaires
• quelques blocs d'un matériau de votre choix (terre, briques ...) pour la construction de la zone de combustion du charbon, située sous la structure même du four.

Les constituants de ces matériaux sont détaillés ci-après.

• 6 plaques de fer (soit 12 lingots de fer)
• 8 blocs de roche : andésite, basalte, granite ou péridotite
• 456 argiles réfractaires, soit environ 8 piles
• 29 mortiers
• 228 unités de chaque poudre requise (en fonction du niveau choisi), ce qui représente environ 4 piles de chaque

Fabrication des briques réfractaires

Les blocs en briques réfractaires sont importants dans le processus de fabrication de l'acier, dans la mesure où aucun autre type de bloc disponible ne peut supporter les températures extrêmes demandées pour l'obtention de l'acier . Ces blocs de briques réfractaires existent en trois déclinaisons de qualité, toutes pouvant servir à la construction du four de cémentation. Chaque bloc en briques réfractaires a une certaine probabilité de recevoir d'être endommagé lors du processus de carbonisation. Toutefois, l'utilisation de blocs d'un niveau plus élevé pourra réduire le nombre de blocs endommagés à la fin du processus :

• Niveau 1 : résistance à la chaleur de 90 % (1 chance sur 10 de rompre)
• Niveau 2 : résistance à la chaleur de 95 % (1 chance sur 20 de rompre)
• Niveau 3 : résistance à la chaleur de 99,9 % (1 chance sur 1000 de rompre)

Pour obtenir les blocs en briques réfractaires, les pierres et minerais spécifiés ci-après doivent être réduites en poudre dans un broyeur . Ces poudres peuvent ensuite être combinées avec de l'argile réfractaire dans la grille d'artisanat pour produire des briques réfractaires non cuites. Le niveau obtenu pour ces briques dépend du nombre de poudres différentes dans le mélange.

Matériau	Pierre	Poudre	Niveau minimal pour la tête de pilon
Bauxite			Bronze
Quartz			Bronze
Olivine			Fer
Ilménite			Acier

Remarque : Un morceau d'ilménite de qualité pauvre ou moyenne donne une unité d'ilménite concassée. Un morceau de qualité riche ou abondante en donne deux.

Du niveau de qualité 1 au niveau 3, les recettes de fabrication des briques réfractaires non cuites sont les suivantes :

Ingrédients	Recette
2x Fire clay 1x Quartz 1x Bauxite

Ingrédients	Recette
2x Fire clay 1x Quartz 1x Bauxite 1x Olivine

Ingrédients	Recette
2x Fire clay 1x Quartz 1x Bauxite 1x Olivine 1x Ilmenite

Raw refractory bricks need to be baked in a pit kiln to turn into fired refractory bricks.

Fired refractory bricks can then be used to craft their tier specific brick blocks and brick grating blocks. Here are the recipes for tier 1:

Ingrédients	Recette
8x Refractory brick 1x Mortier

Ingrédients	Recette
6x Refractory brick 1x Mortier

Building a cementation furnace

The cementation furnace is a multiblock structure that needs to be built in a specific way to ensure it is functioning as intended. When starting the build of a furnace, the player can use Shift + on the stone coffin with coal or an empty hand to trigger a building help overlay. Using Shift + will additionally inform the player about the number of still missing or mis-placed blocks in the structure.

Remarque :

Other required blocks

Additionally to the refractory blocks, there are some more specialist blocks necessary to build a functioning steel making furnace, namely an iron door and a stone coffin including a coffin lid. And iron door can either be found in ruins, or crafted out of 6 iron plates. Stone coffins can be made out of granite , andesite , basalt or peridotite .

Ingrédients	Recette
6x Metal_plate

Ingrédients	Recette
1x Marteau 3x Roche 1x Chisel

Ingrédients	Recette
1x Marteau 1x Chisel 1x Roche 1x Borax

The structure

1. First, place the 6 grate blocks on the ground and the 2 coffin sections on them. These are the center blocks of the structure. The coffin sections will always be placed with the open side towards the player. As soon as the full coffin is placed - without coffin lid, for now - the player can use Shift + on the coffin to display the building help.
2. The full size of the furnace takes up a 5x5 space that is 6 blocks tall, however, an additional layer below the grates will be required to place fuel in.
3. Raise the walls up by two blocks, and don't forget to place the iron door at some point in the process.
4. Build up the roof, covering every open block with one above in a stair pattern. The finished furnace should have a 2 block high chimney as shown below. The chimney on top of the structure does not have to be open to the sky at the moment, but if it is blocked there will be no smoke indications shown while the furnace is running.
5. The confusing part about building a cementation furnace is the space below the actual brick structure. For the process to work, the player needs to be able to access the two spots below the coffin placed on the grate blocks, as the steel making requires fuel layers to be placed on those two blocks. Due to the fact that coal will behave similar to snow if piled up to high, it is recommended to put stabilizing blocks to the side of the two open spaces for the coal. It is not required to close this space off airtight, the player can choose to leave a permanent hole or put in a coke oven door. Note that none of the refractory brick blocks can be removed to access this space, instead the opening needs to be created one block below the lowest brick layer.
6. If the structure was build correctly, there will be no further indication of missing or misplaced block when using Shift + on the coffin.

• 
• 
• 
• 

• 

  Coal needs to be piled exactly below the two middle grid blocks.

• 

  The coal piles need to be encased in some form to prevent collapse - this can also be done with chiselling.

Creating blister steel

Blister steel is the first step of creating steel from iron, and functions the same way an iron bloom does. To heat iron up to the required temperatures to make carbonization possible, the player first needs to build a special furnace structure out of refractory blocks and other specialist blocks. Also, prepare a lot of charcoal, or collect a lot of black coal. One batch of steel will use 168 pieces of charcoal.

Smelting process

With a finished refractory furnace build, the next step requires the player to fill the coffin. One stone coffin will hold a total of 16 iron ingots and 40 fuel pieces - either coke or charcoal . With the fuel in your active hand, target the inside the coffin and use Shift + to place one layer of fuel first, then one layer of iron ingots. Repeat until the coffin is full and will not accept any more items. The coffin should allow 5 layers of fuel with 8 pieces per layer, and 4 layers of iron ingots with 4 ingots per layer. Once filled, the coffin tool tip will indicate that a coffin lid needs to be placed on top of the coffin. You can now place the 2 lid blocks. Note that the coffin needs to be filled completely, otherwise the process will not start even if the lid is placed and coal beneath ignited.

After the coffin is closed, the player should leave the burning chamber and close the door. It is not recommended to enter the chamber again in the middle of the smelting process, as the extreme heat inside will cause 5 HP damage per tick if inside while the bricks are still heated. The coffin tool tip will indicate that the process requires fuel to be placed and ignited below the two grates under the coffin. Access the underbelly of the furnace as shown above from the side or the back of the furnace. Place fuel in equal amounts on the two spaces directly below the coffin. Each fuel layer on one block takes 2 fuel items, meaning a full layer on both blocks requires 4 fuel items. Charcoal , black coal , anthracite and coke work as possible fuel items.

After the carburation process is 100% completed, damaged refractory brick blocks can be broken to return some of their materials back, similar to a broken bloomery. Grate blocks do not get damaged at the moment, which means there is no sense in making them out of higher tier bricks. In addition, not all of the blocks on the cementation furnace building need to be of the same tier, allowing for use of refractory blocks of a different tier when replacing damaged ones.

When testing out the process in creative or survival, keep in mind that the coffin tooltip might take a few seconds to update correctly from one state to the next, specifically once the player ignites fuel below. The coffin will show the progress in percentages, but again it might take a tick until that progress info is shown correctly. A working furnace will have fire particles inside the burning chamber - which also indicates the danger of stepping inside at that time - as well as smoke rising from the chimney.

Remarque :

One firing of 16 iron ingots will reward the player with an equal amount of blister steel ingots.

Making steel

Blister steel in itself is not yet workable steel, instead it behaves similar to iron blooms, and further refining is necessary. To turn blister steel into steel ingots, it needs to be processed on an iron anvil either by hand or with the help of a helve hammer .

Trivia

The design of the refractory furnace is a modified version of the Manuel de la métallurgie du Fer, from 1895 [1]

Video tutorials

Detailed guide on what to get for steelmaking to start	Guide on how to build and use the furnace	German full Guide on how to make steel