Яма для обжига
Ямные печи — единственный текущий метод обжига глиняных предметов, так как костёр больше не выполняет эту функцию. Они создаются путем рытья ямы глубиной в 1 блок и помещения необработанных гончарных изделий на дно. Затем вы заполняете печь сушеной травой, палками и каким-либо топливом (дрова, торф, древесный уголь, уголь и т. д.).
Each finished kiln requires:
- An unfired piece of pottery.
- 10 dried grass: 5 layers of dried grass (2 grass per layer).
- 8 sticks: 2 layers of sticks (4 sticks per layer).
- 4-8 pieces of top-fuel (Some of the larger items such as Storage Vessels require 2 layers of top fuel to fully cover.).
Once fueled they must be ignited with a torch or firestarter.
Elements
Pit Kilns must be protected from rain or other water sources when lit to prevent the fire from going out. Pit Kilns can start fires in the vicinity of the kiln so do not build too close to wooden structures or dried grass.
Fuel Efficiency
The following table breaks down length of firing time from igniting the kiln to the finished product being available for
pick-up.
NOTE: fuel duration does not apply to Kilns, Bloomery, or other similar items, once fueled they run until complete unless extinguished.
Fuel Type | Time to Fire |
---|---|
Firewood | 40 Min |
Peat Brick | 32 Min |
Brown Coal | 28 Min |
Black Coal | 24 Min |
Charcoal | 20 Min |
Coke | 20 Min |