Survival Guide - Advanced tech/zh: Difference between revisions

From Vintage Story Wiki
Created page with "* 通过淘沙或在收集散落在地面的含金属粒石块来获取铜粒。前期,建议先找到40个金属粒做预备。 * 使用塑造泥坯制作出工具模具以及坩埚,然后在坑窑(地面挖一个格的坑,用干草和木棍填充)中烧制它们 - 优先做两个预备工具锤子和镐子。 * 收集木柴并搭建炭坑以生产木炭。"
No edit summary
(Created page with "* 通过淘沙或在收集散落在地面的含金属粒石块来获取铜粒。前期,建议先找到40个金属粒做预备。 * 使用塑造泥坯制作出工具模具以及坩埚,然后在坑窑(地面挖一个格的坑,用干草和木棍填充)中烧制它们 - 优先做两个预备工具锤子和镐子。 * 收集木柴并搭建炭坑以生产木炭。")
Line 141: Line 141:
制作铜工具需要以下材料:
制作铜工具需要以下材料:


* Find copper nuggets either by [[Panning]] or scavenging the surface for nuggets in loose stones. In the beginning, it is recommended to find 40 nuggets to get you started.
* 通过[[Panning|淘沙]]或在收集散落在地面的含金属粒石块来获取铜粒。前期,建议先找到40个金属粒做预备。
* Find [[Clay forming|clay and form]] [[Molds|tool molds]] as well as a [[crucible]] and fire them in a [[pit kiln]] (a one block hole in the ground, fill with dried grass sticks and firewood) - the two starting tools should be a pickaxe and a hammer.
* 使用[[Clay forming|塑造泥坯]]制作出[[Molds|工具模具]]以及[[crucible|坩埚]],然后在[[pit kiln|坑窑]](地面挖一个格的坑,用干草和木棍填充)中烧制它们 - 优先做两个预备工具锤子和镐子。
* Harvest [[Trees|wood]] and create a [[Charcoal|Charcoal pit]] to produce charcoal.
* 收集[[Trees|木柴]]并搭建[[Charcoal|炭坑]]以生产木炭。


Once these items are assembled, metal tools can be crafted by [[casting]] using the [[crucible]]. Detailed instructions can be found on the [[casting]] page. Placing the crucible into the firepit will open 4 slots where nuggets can be added. When heated with a high temperature [[fuel]], the copper will melt and the crucible will transfer to the output slot. Remove the crucible and hold <code>right mouse button</code> to pour metal into a prepared tool mold. When the metal drops below 200 degrees, the tool head can be removed from the mold.
Once these items are assembled, metal tools can be crafted by [[casting]] using the [[crucible]]. Detailed instructions can be found on the [[casting]] page. Placing the crucible into the firepit will open 4 slots where nuggets can be added. When heated with a high temperature [[fuel]], the copper will melt and the crucible will transfer to the output slot. Remove the crucible and hold <code>right mouse button</code> to pour metal into a prepared tool mold. When the metal drops below 200 degrees, the tool head can be removed from the mold.
Confirmedusers, editor
581

edits