Alcohol brewing

From Vintage Story Wiki
Revision as of 15:59, 9 February 2022 by NiclAss (talk | contribs) (Marked this version for translation)

Alcohol Brewing incorporates two distinct stages of production, namely the relatively easy fermentation process and the more complicated distillation process.

Alcohol

It is noteworthy that alcohol does not spoil, while still providing saturation - therefore turning excess ingredients into alcohol for storage is a valid strategy.
Imbibing alcohol however leads to visual impairment - the player character will swerve their head from left to right, which actually affects movement in the game, since it is hard to walk in a straight line without actively counteracting the movement direction chosen by the swerving head.
The amount and quality of alcohol imbibed influences the severity and duration of impairment.

Fermented Alcohol

Fermented alcohol provides both satiety and a nutrition value in the fruit category - regardless if the source material actually was a fruit or not.
The ratio mentioned refers to the amount of ingredients required in comparison to the alcohol received. The time refers to the duration the ingredients need to be sealed inside a barrel.
Each type of alcohol and its creation process is detailed farther down.

Item Satiety per Litre Nutrition Category Ratio Time Notes
Mead 160 Fruit 1:1 14 days
Apple Cider 160 Fruit 1:1 7 days
Cherry Cider 160 Fruit 1:1 7 days
Peach Cider 160 Fruit 1:1 7 days
Orange Cider 160 Fruit 1:1 7 days
Mango Cider 160 Fruit 1:1 7 days
Lychee Cider 160 Fruit 1:1 7 days
Grenadine 160 Fruit 1:1 7 days Basically a pomegranate cider, but with a fancy name.
Perry 160 Fruit 1:1 7 days Basically a pear cider, but with a fancy name.
Blueberry Wine 200 Fruit 1:1 7 days
Cranberry Wine 200 Fruit 1:1 7 days
Red Currant Wine 200 Fruit 1:1 7 days
White Currant Wine 200 Fruit 1:1 7 days
Black Currant Wine 200 Fruit 1:1 7 days
Saguaro Wine 160 Fruit 1:1 7 days
Pineapple Wine 160 Fruit 1:1 7 days
Spelt Ale 160 Fruit 5:1 14 days
Rice Ale 160 Fruit 5:1 14 days
Rye Ale 160 Fruit 5:1 14 days
Amaranth Ale 160 Fruit 5:1 14 days
Cassava Ale 160 Fruit 5:1 14 days
Breadfruit Ale 200 Fruit 1:1 7 days Despite being titled as an ale, it behaves like a wine.

Distilled Alcohol

Compared to merely fermented alcohol, distilled alcohol offers the same or even less overall saturation and no nutritional benefit. It does however cause worse visual impairment when consumed, and similarly does not rot or turn bad with time.
Additionally, once distilled alcohol is the first step to acquiring Aqua Vitae - twice distilled alcohol - which can be used to craft alcohol soaked Bandages.
The ratio mentioned refers to the amount of ingredients required in comparison to the distilled alcohol received. The time refers to the duration the boiler and condenser need to run to produce 1L of distilled alcohol.

Item Satiety per Litre Source Ratio Time
Distilled Mead 160 Mead
Vinegar 160 Apple Cider
Cherry Brandy 160 Cherry Cider
Peach Brandy 160 Peach Cider
Orange Brandy 160 Orange Cider
Mango Brandy 160 Mango Cider
Lychee Brandy 160 Lychee Cider
Pomegranate Brandy 160 Grenadine
Pear Brandy 160 Perry
Blueberry Brandy 160 Blueberry Wine
Cranberry Brandy 160 Cranberry Wine
Red Currant Brandy 160 Red Currant Wine
White Currant Brandy 160 White Currant Wine
Black Currant Brandy 160 Black Currant Wine
Saguaro Brandy 160 Saguaro Wine
Pineapple Brandy 160 Pineapple Wine
Spelt Whiskey 160 Spelt Ale
Sake 160 Rice Ale
Rye Whiskey 160 Rye Ale
Amaranth Whiskey 160 Amaranth Ale
Cassava Vodka 160 Cassava Ale
Breadfruit Vodka 160 Breadfruit Ale

Fermentation

Different kinds of base ingredients can be fermented to alcohol by sealing them in a barrel for a specified amount of time. These different base ingredients will result in different kinds of alcoholic beverages, each with their own type name:

  • Mead - made from honey
  • Cider and Wine - made from different kinds of fruit and berry juices
  • Ale - made from different kinds of flour fermented with water

All fermentation processes require at least a barrel, a bucket or bowl, as well as the above mentioned ingredients. Some of the these are harder to acquire then others, but generally speaking fermentation should not be attempted before entering the metal age - since barrels and buckets require a saw - and establishing a comfortably safe and well outfitted homestead.

Mead

A full barrel of honey ready for fermentation

Apart from the barrel and bucket, the only ingredient required for mead is honey. Honey can be acquired from bee hives, to ensure a sufficient supply of honey for both brewing and other usage, it is recommended to follow the Beekeeping guide and build up a well developed beekeeping enclosure.

To ferment honey into mead, it simply needs to be transferred into an empty barrel and sealed. The tooltip inside of the barrels UI will inform about the resulting amount as well as the duration the barrel will need to stay sealed. For mead, the conversion from base ingredient to alcohol is 1:1, meaning even just one litre of honey will turn into 1 litre of mead. The sealing duration however is exactly 14 days regardless of the sealed amount. Since honey doesn't spoil, there is therefore no reason to ferment in small increments, instead the player could wait until gathering a full barrel.


Cider and Wine

A full barrel of lychee juice ready for fermentation

Making cider and wine requires a bit more preparation before the fermentation process can start. Specifically, fruit can not be fermented in its raw state, it needs to be turned into juice first. This however requires a Fruit Press. Once fruit juice was procured from the raw fruit, the following process is much like the one for mead.
To ferment fruit juice into cider or wine, it simply needs to be transferred into an empty barrel and sealed. The tooltip inside of the barrels UI will inform about the resulting amount as well as the duration the barrel will need to stay sealed. For cider or wine, the conversion from base ingredient to alcohol is 1:1, meaning even just one litre of juice will turn into 1 litre of cider or wine. The sealing duration however is exactly 14 days regardless of the sealed amount. Raw fruit itself will spoil rather quickly, the juice made from the fruits however does not. Therefore cider and wine are not specifically a method for preserving fruit nutrition and instead more of a prestige process.


Ale

A full barrel of water with spelt flour, ready for fermentation

To brew ale, a barrel, a liquid container as well as an amount of flour is required. Only specific types of flour can be used for fermentation, specifically:

  • spelt
  • cassava
  • rye
  • rice
  • amaranth

Flax and sunflower flour cannot be used to ferment ale.

To craft flour, a quern is needed, which in turn requires full stone blocks and therefore a metal pickaxe. Since the quern can be powered by hand, automation is not required.
To ferment flour into ale, a barrel needs to be filled with water and flour in a 1:1 ration, meaning 1 litre of water requires 1 flour. However, the ingredients will not be turned into alcohol with the same ratio, meaning unlike for mead and cider, it requires more base ingredients to acquire the same amount of alcohol. The actual ratio is 5:1, which means it requires 5 litres of water and 5 flour to make 1 litre of ale - therefore 1 litre of water and 1 flour results in 0.2 litres of alcohol. This process can be done in 1 litre steps, however due to the long shelf life of flour there is no urgent need to turn flour into alcohol immediately.
The fermentation process takes 14 days regardless of the amount of ingredients.

Fruit-breadfruit.png Protip:
While breadfruit turns into an alcohol titled 'Ale', it does not actually follow the same mechanics of flour based ales and instead behaves like a fruit wine instead.



Distillation

Requirements

The process of distillation first requires a boiler and condenser. Both of these are made from processed copper, tin and lead or silver - and therefore require the player to have at least reached the copper age, including a finished copper anvil.

Shopping List

For one set of boiler and condenser, the player would need:

  • 7 copper plates = 14 copper ingots
  • 1 soldering iron = 1 stick and 1 copper chisel (= 1 copper ingot)
  • 7 Solder Bars = 2 ingots of either lead or silver solder alloy, as well as a saw with enough remaining durability

Soldering Iron

A soldering iron is a tool used, for the moment, exclusively to craft the boiler and condenser. It requires a stick and a copper chisel - keep in mind that the durability left on the chisel will be carried over to the soldering iron. Given that one crafting process including the soldering iron only takes 3 durability - and only 2 processes are needed for a fully working distillery - it is almost advisable to use an already used chisel with only around 6 durability left over for this.

Copper Chisel

Stick




Solderingiron








Solderbars

Solderbars are, for the moment, exclusively used to craft the boiler and condenser. They require a saw of any metal type, as well as ingots made from one of the two available solder alloys - Lead Solder or Silver Solder Ingots. These ingots can be created through casting, combining tin with either lead or silver in the correct amounts:

  • Lead Solder: Lead (45% to 55%) and Tin (45% to 55%)
  • Silver Solder: Silver (40% to 50%) and Tin (50% to 60%)


Copper Saw

Leadsolder Ingot




Solderbar

Solderbar

Solderbar







Boiler & Condenser

Both of these are made mainly from copper and require a Soldering Iron made from copper as well, as seen above.

Solderingiron

Solderbar

Copper plate

Copper plate



Condenser


Solderbar

Solderbar





Solderingiron

Solderbar

Copper plate

Copper plate

Copper plate


Boiler


Solderbar

Solderbar


Copper plate

Copper plate

Copper plate

Copper plate




Process

The distillation setup includes a total of three steps, and should be done in a certain order to avoid placement headaches.
The first object that should be placed is the boiler. Arrange it so there is at least one block space to one side of the boiler - this is where the condenser can be placed in the next step. Additionally, there needs to be room to access the boiler itself, since the third step of the setup needs a campfire to be placed below the boiler.
The condenser can be placed while targetting one side of the boiler, and will then be put down on the block next to that side. It is technically possible to have more than one condenser attached to the same boiler, however only one condenser will be used at the same time.
The next step requires a campfire to be set up under the condenser. Unfortunately, even when targetting the space below the boiler correctly, it might happen that the player will set down a grass on the block they are on first and only in the second click set it correctly below the boiler. Therefore, the player may either use one grass temporarily, or pre-emptively set down an item (such as a loose stone or a bowl) on the block they are standing on, directly beside the boiler, to avoid this from happening. The same issue repeats when trying to place the firewood to finish the campfire.
The campfire should only be ignited once the condensation process can start!


Once the setup is complete, the boiler needs to be filled with an alcoholic beverage - either fermented alcohol or once distilled alcohol - and the condenser needs to be filled with water. Before starting the process, a bucket needs to be placed under the condenser snout. The boiler can be filled with up to 30 litres of the same alcohol, whereas the condenser can hold 10 litres of water at a time. The campfire below the boiler can take up to 4 pieces of firewood each time, which amounts to a burn time of 8 hours. At the moment, it is not possible to directly open the firepit GUI and input more than 4 pieces - nor is it possible to restock fuel during the process.
Therefore, a distillation can be started and then left to work on its own. The player only needs to return after 8 hours to restart the fire with new fuel - however, this will waste fuel, as explained below.
Before the condensation process starts, the boiler temperature needs to reach about 78°C, this will take 0.2h of the initial fuel time. The temperature of the boiler will not rise above 100°C. After the fuel is consumed or the alcohol has been processed, the boiler will show as "cold" and the campfire will be extinguished automatically. However, if firewood or alcohol is restocked fast enough, the campfire will ignite again automatically. The temperature will sink during the time the campfire is out, and will rise up again to reach 100°C.
Once the campfire has been fired through once, it does not require the full 4 pieces of firewood placed down to be started again, and therefore smaller amounts of alcohol can be processed without wasting too much fuel. Similarly, the remaining fuel time of a distillation process once all source alcohol is gone remains and can be used towards the next process.

Below is a table of required source alcohol, water and fuel to receive a certain amount of distilled alcohol. The time needed includes initial heating time and the firewood needed takes into consideration, that 4 pieces are needed to start the first fire - the second number in brackets displays the actual need.

Source Alcohol Water Firewood Time needed Resulting Alcohol
1L 0.07L 4 (1) 0.3h 0.1L
10L 0.5L 4 (1) 1.9h 1L
20L 1L 4 (2) 3.8h 2L
30L 1.5L 4 (3) 5.7h 3L

Video Tutorials

General Brewing Explanation


{{{title}}}